Antminer D3

Mining cryptocurrency: DASH
Hash rate: 15 GH/s (Variation of ±5% is expected)
Hashing algorithm: X11
Power consumption: 1200W.
Power Efficiency: 1.6 J/MH + 10% (at the wall, with APW3 93% efficiency, 25°C ambient temp)
Rated Voltage: 11.60 ~13.00V
Operating Temperature: 0 °C to 40 °C
Network Connection: Ethernet
Dimensions: 12.6" x 5.11" x 7.48"
Hashing Algorithm: X11
Warranty: 180-day limited product warranty is included from the manufacturer. Please reference Bitmain website for conditions.

Power supply unit is not included and available for extra payment.

Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.

Bitmain recommends the use of the APW3++ PSU with the Antminer D3. One APW3++ PSU can not power more than one Antminer D3.

All PCIe connectors on a hashing board need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!

Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the PCI-E connectors are connected to power supply.